






|
Bear's Mill
Bear's Mill site was established in 1832 when Major George Adams built
a sawmill and subsequently a corn cracker mill. The present 3 1/2-story mill was built in
1848 by Moses and Manning Hart. The final completion of the building was done by Gabriel
Baer, the new owner and an accomplished miller from Pennsylvania. The mill presently
carries Gabriel Baer's name but somewhere the vowels were inverted and today the mill is
known as BEAR'S MILL.
One of the few functioning gristmills left in Ohio, Bear's Mill and the
surrounding mill grounds are exquisitely maintained and graciously shared with the public.
Privately owned and operated, Bear's Mill is water-powered with two turbines located under
the mill's first floor. Measuring 44" and 30.5", the turbines receive water from
the Greenville Creek. About 1/2 mile upstream there is a large concrete dam that creates a
huge, beautiful millpond in the stream. Water from the millpond is channeled into a
millrace that parallels Greenville Creek to the mill. Greenville Creek creates a 9' head
of water at the mill. The water drops into and through the turbines and exits via a
tailrace on the opposite side of the mill back into Greenville Creek. The 30.5"
turbine has the date of 1862 cast in the crown plate. Both turbines provide 65 horsepower.
The mill grounds are maintained so visitors can walk between the
millrace and creek to see the dam and the sluice gate that maintains the water flow into
the millrace.
Bear's Mill building is nothing less than spectacular. The exterior is
covered with the original lap siding that Gabriel Baer put on the mill in 1849! Made from
American Black Walnut, the siding adds a provocative nature to the old mill. The structure
has an extremely textured appearance. The weathered, charcoal-gray siding, the small 6
over 6 double-hung sash windows, and the grain handling doors on all four levels, create a
delightful experience.
The interior of the mill is equally dramatic. The entire 3 1/2 floors
are accessible to the public. It is full of antique milling equipment. The first floor has
a line shaft that transfers the power from the turbines up to the three sets of French
buhrstones and to the rest of the mill. The first floor also holds a generator that powers
the lights for the mill store. The second floor is where the milling, sacking and
barreling are accomplished. The original three sets of French buhrstones that were placed
here in 1850 have been maintained and are still grinding today. There were five roller
mills installed in 1887. Three of them are still found in the mill. Storage bins, a flour
purifier, power transfer machinery (belts, pulleys, and gears), and sifting equipment are
found on the third floor. The loft has the corn screener, scourers, aspirator and top line
shaft. The winch hauls the grain up to the loft and is powered by the turbines. The winch
is fully functioning and lifts the grain from the ground outside to the third-story loft
with ease. All of the antique machinery at Bear's Mill, whether it is functioning or on
display as a museum piece, is excellently preserved. Bear's Mill is listed on the National
Register of Historic Places.
The mill store, on the first floor, sells yellow cornmeal, whole-wheat
cake flour, unbleached white cake flour, buckwheat flour, rye flour, bran, and pancake
mixes. Another portion of the store offers two unique styles of pottery. Bear's Mill
Pottery is produced by Julie Clark. Maple Wood Pottery is produced by Jane Hoskensmith.
Handmade baskets are also for sale.
Privately owned, Bear's Mill is enthusiastically shared with the pubic.
The mill is open every Saturday from 9-5 and every Sunday from 11-5 all year. Extended
hours are offered from October through December.
While touring Ohio's mills, don't miss Darke County's oldest industrial
business that has functioned for over 160 years. You will not be disappointed.
("Bear's Mill."; "Bear's Mill Since 1849."; Clark, Julie;
"Historical Bear's Mill.")
DIRECTIONS: Darke County. Adams Township. From Greenville, S.R. 36 east
3.5 miles, south (right) on Arcanum-Bear's Mill Road, .25 mile on the right at 6450
Arcanum-Bear's Mill Road.
History & Owners
President
James Monroe presented Major George Adams the land and water rights at the mill site with
a Presidential Deed as a reward for his military service. |
1824 |
Major
George Adams established the mill site with a sawmill and corn cracker mill. |
1832 |
The present
mill building was constructed by Moses and Manning Hart from Greenville. |
1848 |
Gabriel
Baer, a miller from Pennsylvania purchased the mill from the feuding Hart brothers. Baer's
son and son-in-law managed the mill. |
1849 |
Jesse
Tillman and John Townsend purchased the business for $8,000. |
1862 |
A
progression of owners followed between 1864 and 1873: William Townsend (John Townsend's
son?), Milton & James Oliver, William Bierly, John Tillman (Jesse Tillman's son?),
Adam Coppess, Levi Reck, and Milton Oliver. |
1864 |
John Stoltz
& Family purchased a large share of the mill. |
1873 |
G. W.
Cromer bought a share and converted the mill into a roller mill. |
1882 |
Marcellus
Cromer, G.W. Cromer's son, purchased John Stoltz's share of the mill. Marcellus Cromer
operated the mill for 65 years, until his death in 1947. "Cromer must have been a
colorful character, as stories heard from old-timers are still around about him
("Historical Bear's Mill")." |
1884 |
The wooden
dams were replaced with concrete as part of a flood control project. There are two dams.
The main dam is 160'. The second dam is 65' long. They are connected by a natural levee. |
1922 |
Charles
Andrews purchased the mill and ground wheat and corn that were organically grown without
chemicals. |
1947 |
Terry and
Julie Clark and Paul Carr purchased the mill. |
1981 |
Mike
Johnson and Jane Hockensmith purchased Paul Carr's share of the mill. |
1885 |
|
|
|